1. In order to avoid long-term stop of production line during replacement of new equipment, we have pre-reserved 1 month for engineering reform. We have also expressed it clearly at the time of purchasing the equipment, hoping to shorten the erection period of the new equipment. The engineers arranged by SBM for this work were very responsible and worked 14 hours each day and conducted professional handling against emergencies on the site. In the end, the erection and commissioning of all the equipment were completed in only half a month.
2. Compared with the 3R roller mill we adopted before, SBM MTM130 milling system is very different and the yield has increased substantially. Since its application for one year, the machines run smoothly. It only needs to work eight hours per day to meet the production demand and the grinder roll and ring have little wear. The workshop is very clean inside. During the past one year, the engineers of SBM visited the workshop for three times to investigate the equipment service condition and gave many suggestions on equipment maintenance, which have released my worries a lot. Until now, I am very satisfied with the quality of this mill.
3. Once, one piece of iron entered into the mill due to the operator’s fault, which led to stop of machines and breakage of the grinder roll hanger. The spare parts were sent directly from the factory in Jiangsu and were received just in the second day after contacting SBM. The production resumed, saving economic losses of tens of thousands of yuan.