Hematite iron ore beneficiation plant

Hematite deposits are mainly sedimentary in origin, rarer than magnetite bearing BIFs or other rocks which form its main source or protolith rock. Research and utilization of low grade iron ore plays an important role in the whole beneficiation process. The main beneficiation process includes gravity separation, flotation, strong magnetic beneficiation or mix several beneficiation process, and magnetization roasting and then weak magnetic separation.

Hematite iron ore beneficiation flow chart

Hematite iron ore beneficiation equipment
Iron ore crushing equipment	1. Primary crusher(<30mm):Jaw crusher
	2. Secondary crusher(<10mm):Cone crusher ore fine jaw crusher
Iron ore grinding equipment	Wet ball mill
Iron ore concentrate dressing equipment	jigger, centrifugal separator, spiral chute, spiral washing machine, shaking table, electromagnetic strong magnetic separator,

Helpful hints: since iron ore information should be accurate for its dressing flow, our engineers need to know well about your raw materials before designing the dressing solution.

Crushing and grinding

Hematite ores are harder than magnetite ores, and therefore require more energy to crush and grind if beneficiation is required. Hematite ores in large lumps should be sized into required dimension through primary crushing and secondary crushing. Grinding process would also be conducted if necessary in the following steps.

Gravity separation

Many factors would influence the performance of shaking tables, such as slopes, stroke, frequency, amounts of washing water, characteristics etc. in order to upgrade the concentrate, one stage of cleaner is used and the cleaner middlings are re-ground and mixed with rougher middlings for magnetic separation.

High intensity magnetic separation

Since the iron contents in the rougher middlings and cleaner middlings are high, and the particles size of the cleaner middlings is relatively large, you would use high intensity magnetic separator to process the mixture of cleaner middlings after regrinding and rougher middlings.

Flotation

Open-circuit flotation process is adopted and corn starch is used as depressants, CaO as activators, LKY as collector. Concentrates and tailings obtained after one cleaner and three scavengers are greatly upgraded.