- Mining Benefication
- Mining Ore Crusher
- Mining Grinding
- Ore Benefication
The Floatation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.
Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn.
| Model | Effective capacity (m³) |
capacity | Diameter of impeller |
Revolution of impeller |
Motor power KW | Weight of 4 cell | |
| for agitating | for scraper | ||||||
| XJ1 | 0.13 | 0.05~0.6 | 200 | 600 | Y90L-4 | 1.5 | 0.55 |
| XJ2 | 0.23 | 0.12~0.28 | 250 | 504 | Y100L2-4 | 1.5 | 0.55 |
| XJ3 | 0.35 | 0.18~0.4 | 300 | 483 | Y112L-4 | 1.5 | 0.6 |
| XJ6 | 0.62 | 0.3~0.9 | 350 | 400 | Y132S-6 | 3 | 1.1 |
| XJ11 | 1.1 | 0.6~1.6 | 500 | 330 | Y132M2-6 | 5.5 | 1.1 |
| XJ28 | 2.8 | 1.5~3.5 | 600 | 280 | Y160L-6 | 11 | 1.1 |
| XJ58 | 5.8 | 5~7 | 750 | 240 | Y200L2-6 | 22 | 2.2 |
| Model | (m3)Effectivevolume | (m3/min)Capacity | (mm) D. of impeller | r.p.m Impeller revolution | (kw) Motor power for agitation | (kw) Motor power for scraper | (kg) W. of single tank |
| XJQ-40 | 4 | 2-5 | 400 | 290315 | 11 | 1.1 | 3100 |
| XJQ-80 | 8 | 4.2-10 | 560 | 205225 | 22 | 5146 | |
| XJQ-160 | 16 | 8-20 | 700 | 170180 | 30 | 1.5 | 9314 |
| XJQ-280 | 28 | 14-35 | 760 | 166185 | 55 | 15940 |
| model | effective volume (m3) |
handling capacity (m3/min) |
impeller diameter (mm) |
impeller revolutions (r/min) |
power(kw) | chute weight(kg) | |
| for stirring | for scraper | ||||||
| SF-0.37 | 0.37 | 0.2-0.4 | 300 | 352-442 | 1.5 | 0.55 | 936 |
| SF-0.7 | 0.7 | 0.3-1.0 | 350 | 336 | 3 | 1.1 | 1882 |
| SF-1.2 | 1.2 | 0.6-1.6 | 450 | 312 | 5.5 | 1.1 | 2745 |
| SF-2.8 | 2.8 | 1.5-3.5 | 550 | 268 | 11 | 1.5 | 4240 |
| SF-4 | 4 | 2-4 | 650 | 235 | 15 | 1.5 | 5165 |
| SF-8 | 8 | 4-8 | 760 | 191 | 30 | 1.5 | 8258 |
| Model | Effective Capacity (m3) | Capacity (m3/min) | Diameter of mpeller (mm) | Revolution of impeller (r/min) | Motor power(kw) | Weight of cell (kg) | Remarks | |
| For agitating | For scraper | |||||||
| JJF-4 | 4 | 2-4 | 410 | 305 | 11 | 1.5 | 2303 | Auto air suction,to be arranged with gradient,and may be combined with model SF. |
| JJF-5 | 5 | 2-6 | 410 | 305 | 11 | 1.5 | 2416 | |
| JJF-8 | 8 | 4-8 | 540 | 233 | 22 | 1.5 | 4500 | |
| JJF-10 | 10 | 5-10 | 540 | 233 | 22 | 1.5 | 4820 | |
| JJF-20 | 20 | 5-20 | 700 | 180 | 37 | 1.5 | 8500 | |
