- Mining Benefication
- Mining Ore Crusher
- Mining Grinding
- Ore Benefication
Sprial classifier has four type,they are immerged single spiral classifiers and immerged double spiral classifiers, high weir spiral classifiers and submerged spiral classifiers.
If the overflow edge is higher than the center line of spiral shaft and lower than the external diameter of spiral at the overflow end, the spiral classifiers are high weir ones. If the overflow edge is higher than the center line of spiral shaft and also higher than the external diameter of spiral at the overflow end, the spiral classifiers are submerged ones.
High weir classifiers are usually used for the classification with particle size of below 100 meshes. Submerged classifiers are usually used for the classification with particle size of below 200 meshes.
Model |
Spiral Dia(.mm) |
Spiral Speed(r/min) |
Output | Motor Power | Weight(t) |
|||
| Circulating Load(t/24h) | Overflow Quantity(t/24h) | Lift Lower(kw) | Drive(kw) | |||||
Submerged double spiral classifier |
||||||||
| 2FC-12 | Φ1200 | 3.8、6 | 1770-2800 | 240 | 2.2×2 | 7.5×2 | 19.61 | |
| 2FC-15 | Φ1500 | 2.5、4、6 | 2280-5480 | 370 | 2.2×2 | 7.5×2 | 27.45 | |
| 2FC-20 | Φ2000 | 3.6、5.5 | 7780-11880 | 640 | 3×2 | 22;30 | 50 | |
| 2FC-24 | Φ2400 | 3.67 | 13700 | 910 | 3×2 | 30 | 53.491 | |
| 2FC-24 | Φ2400 | 3.67 | 13700 | 910 | 4×2 | 37 | 65.283 | |
| 2FC-30 | Φ3000 | 3.2 | 23300 | 1410 | 4×2 | 45 | 84.87 | |
Submerged single spiral classifier |
||||||||
| FC-12 | Φ1200 | 2.5、4、6 | 1170-1630 | 120 | 2.2 | 7.5 | 11.1 | |
| FC-15 | Φ1500 | 2.5、4、6 | 1140-2740 | 185 | 2.2 | 7.5 | 15.32 | |
| FC-20 | Φ2000 | 3.6、5.5 | 3890-5940 | 320 | 3 | 11、15 | 29.056 | |
| FC-24 | Φ2400 | 3.64 | 6800 | 455 | 4 | 18.5 | 37.267 | |
| FC-30 | Φ3000 | 3.2 | 11650 | 705 | 4 | 22 | 46.2 | |
High-weir single spiral classifier |
||||||||
| FG-3 | Φ300 | 8.3-2.2 | 30-80 | 10-30 | 2.2 | 1.1 | 0.67 | |
| FG-5 | Φ500 | 8.5-15.5 | 143-261 | 32 | 2.2 | 1.1 | 1.6 | |
| FG-7 | Φ750 | 4.5-9.9 | 256-564 | 65 | 2.2 | 3 | 2.83 | |
| FG-10 | Φ1000 | 3.5-7.6 | 473-1026 | 85 | 2.2 | 5.5 | 4 | |
| FG-12 | Φ1200 | 5、6、7 | 1170-1600 | 155 | 2.2 | 5.5 | 8.54 | |
| FG-15 | Φ1500 | 2.5、4、6 | 1140-2740 | 235 | 2.2 | 7.5 | 11.68 | |
| FG-20 | Φ2000 | 3.6、5.5 | 3890-5940 | 400 | 3 | 11、15 | 20.45 | |
| FG-24 | Φ2400 | 3.64 | 6800 | 580 | 3 | 15 | 25.65 | |
| FG-30 | Φ3000 | 3.2 | 11650 | 893 | 4 | 22 | 40.9 | |
High-weir double spirals classifier |
||||||||
| 2FG-12 | Φ1200 | 5、6、7 | 2340-3200 | 310 | 2.2×2 | 5.5×2 | 15.84 | |
| 2FG-15 | Φ1500 | 2.5、4、6 | 2280-5480 | 470 | 2.2×2 | 7.5×2 | 21.11 | |
| 2FG-20 | Φ2000 | 3.6、5.45 | 7780-11880 | 800 | 3×2 | 22、30 | 36.34 | |
| 2FG-24 | Φ2400 | 3.67 | 13600 | 1160 | 3×2 | 30 | 53.49 | |
| 2FG-30 | Φ3000 | 3.2 | 23300 | 1785 | 4×2 | 40 | 73.03 | |
