A quarry operator in the UAE needed to expand their crushing and screening plant in order to cope with an increase in chip and sand demand from the market. Material is granite. They already have one primary and a secondary crusher. Material comes out from the impact above 20mm. the secondary crusher was being operated at very tight settings, but still was unable to cope with the fines requirements. Final products they required is 0-5mm; 5-10mm; 10-20mm (total 3 products).

■ Project name: Angola granite plant 700 TPH ■ Time starting production: March, 2010 ■ Material sourcing: quarry ■ Material type: granite ■ Max. diameter: 750mm ■ Moh's hardness:■ Designing production: 700TPH ■ Working hours: 8 hours per day

Under guidance of our engineer, they have finished the installation and commissioning. The classifier is adjusted for required size and the capacity has reach to more than 4t/h. Now the plant is running stably with good performance.

Kazakhstan is located in Eurasia and ranked as the ninth largest country in the world. It is also ranked the world largest landlocked country, and Shibang is a professional manufacturer of stone crushers and grinding mills, which has exported to over 170 countries.

A Nigeria quarry operator produces aggregates for use in road base, concrete and asphalt from granite.This operator has a original two stage crushing plant which consists of a primary (600×900mm) 24×36"jaw crusher, two secondary (300×1300mm) 12×51" finer jaw crusher.

Tajikistan is an important mining machine market for every mining equipment manufacturer. Also for Shibang crusher machine. In the past few years, Shibang mining equipment helped Tajikistan to be significant to world mineral markets as a gold producer. Especially in the antimony mining...

SHIBANG SCM Ultrafine MILL are widely applied in industries such as painting, paper, agriculture, chemical, PVC plastic, metallurgy, power supply, etc. With the increasing demand of powder making industry, Shibang SCM ultrafine mill will play an even important role in modern mining industry.

After the explosion, customer use the rock driller to make the big stone to smaller, so as to feed them into the primary Jaw Crusher, so, the feed size is around 400mm; so, they use the trucks with the capacity of 15 M3 for one car to transport the stone to the hopper over the Vibrating Feeder, after the Primary Jaw Crusher, they use the PYB900 as secondary crusher, after this, almost 75% of the stone will be under 30mm, so, the over size will transport to the Cone Crusher...

Calcium Carbonate Limestone (marble) crushing unit includes crushers, ball mills and air classifier powder concentrator and other machines. The final products are stone powder with mesh size 400/37 micron, 800/18 micron, 12 micron and 8 micron. And the capacity is about 2 to 4 tons per hour.