Summary: Ekuhlaleni kwezimayini, iI-Raymond Mill iyithuluzi elibalulekile kakhulu lokucubungula amatshe. Ngokusekelwe nosayizi wokukhiqiza, kunephutha phakathi kokusetshenziswa...

Ekuthuthukisweni kwemigodi, I-Raymond Mill iyinto ebalulekile kakhulu yokusebenza kwamatye. Ngenxa yomkhiqizo, kukhona umehluko phakathi kokusetshenziswa kwezinhlaka ezinkulu zokukhiqiza nezokusebenza ezincane ze-Raymond mill. Ekusebenziseni izinto zethu zemathiriyeli, kubalulekile ukuhlela nokuqeqeshwa kwezixazululo ze-Raymond mill. Lapha, u-Xiao Bian uhlanganisa ngokufushane izinto ezidinga ukunakekelwa lapho kuhlongozwa nokuqeqeshwa kwe-Raymond mill encane.
Okokuqala, kufanele sivumele oqeqeshwe ngokwengqondo ukuthi bafake kahle i-Raymond mill encane entsha, ukuze
Secondly, in the commissioning operation stage of the installed small Raymond mill, it should be divided into two stages: no-load operation and load operation. In the small Raymond grinding load operation test machine, the Raymond mill's grinding roller device should be fastened with the wire rope to prevent the grinding roller ring contact impact with the operation of the small Raymond mill. At the same time, it should be noted that the empty running test machine should not be less than 1 hour, and ensure that the main engine is running smoothly and orderly, so that the oil temperature in the tank is kept below 80 °C, and the temperature rise should not exceed 40°C.
Okwesithathu, ngesikhathi sokusebenza okugcwele kwe-raymond mill encane, kumelwe kunakekelwe ukukhanya kwezwi okungajwayelekile nokugomela okungajwayelekile ngemuva kokuthi umshini sewuqale ukusebenza ngendlela ejwayelekile, ukuze kuqinisekiswe ukuthi asikho ukungena komoya emathanjeni wezindlela zonke zomoya. Lapho umshini wokuhlola usuqediwe, qinisa futhi zonke izibambiso.
Fourth, when we are debugging the operation of the small Raymond mill, we must pay attention to the air blower to start the air load, and then load it after the equipment is running normally. At the same time, observe the smoothness of its operation. Under the condition of ensuring no abnormal sound and vibration, the maximum temperature of the rolling bearing is not higher than 70 °C, and the temperature rise is not more than 35 °C.
Okwesihlanu, ekufakweni nasekusebenzeni kwentshwayo encane yeRaymond, ukuphakama komsebenzi wespressi spring kuzansi, amandla okuluma kwe-roller ephansi ye-roller yokuphakamisa kuzona, futhi umphumela wemishini ukhululekile kakhulu. Ngakho-ke, enqubweni yokusebenzisa imishini encane yeRaymond, kufanele sigxile ekulawuleni ukuphakama kwemisebenzi ye-presuppressi spring, avamise phakathi kuka-200-210 mm.