Summary: Menetfúró az egész gyártósoron az első számú vezető. A tömörítő berendezés szerepe az egész gyártósoron az, hogy nagy anyagokat feldolgozzon...

Fogaskerék zúzó az egész gyártósor élharcosa. A törőberendezés szerepe az egész gyártósoron az, hogy nagy anyagokat, amelyek tömörítési szilárdsága nem haladja meg a 320 MPa-t, egy állkapcsos törőbe dolgozzon át, ahol közepes méretű anyagokká törik. Ezután a közepes törésművelethez beszáll a konusztörő vagy az ütköző törő, majd az állkapcsos, konuszos, ütközős törő és a szitakészítő gép együtt alakítanak ki egy murva- és kavicsberakó gyártósort.

A piacon lévő különböző zúzástechnikai igények kielégítése érdekében az SBM állkapocszúzó három sorozatot kínál: PE sorozatú állkapocszúzó, PEW sorozatú állkapocszúzó és C6X sorozatú állkapocszúzó. Ezek a sorozatok és modellek kielégítik a piacon lévő zúzási igényeket, széles körben használják a építőiparban, építőanyag-iparban, közlekedésben, bányászatban, vegyiparban, vízügyi és vízerőmű-iparban.

A fogazó zúzó főként egy vázból, egy excentrikus tengelyből, egy nagy görgőből, egy lendkerékből, egy oldalvédőből, egy konzolból, egy konzol hátsó ülésből, egy hézagbeállító csavarból, egy visszatérítő rugóból, egy rögzített és egy mozgatható állkapocsból áll.

The crusher of the jaw crusher is a curved extrusion type. During operation, the motor drives the belt and the pulley, and moves the movable jaw up and down through the eccentric shaft. When the moving jaw rises, the angle between the bracket and the moving jaw becomes larger, thereby pushing the movable jaw to approach the fixed jaw, and the material passes through the two jaws. Extrusion, boring and rolling between the plates can achieve multiple crushing; when the moving jaw moves downward, the angle between the bracket and the moving jaw decreases. The moving jaw leaves the fixed jaw under the action of the tie rod and spring, and the crushed materials are discharged freely from the lower discharge opening of the crushing chamber under gravity. With the continuous rotation of the motor, the dynamic crushing and discharging are performed periodically to achieve mass production.