Summary: Ing pangembangan tambangku, Raymond Mill minangka piranti olah watu sing wigati banget. Gumantung marang ukuran produksi, ana bedane antarane panggunaan...

Ing pambangunan tambang, Raymond Mill minangka piranti pangolahan watu sing wigati banget. Gumantung saka gedhene produksi, ana bedane antarané panggunaan jalur produksi gedhé lan piranti Raymond mill cilik. Ing proses pangolahan bahan tambang kita, wigati banget kanggo nginstal lan ngadegaken piranti Raymond mill. Ing kéné, Xiao Bian mung nyimpulaké titik-titik sing kudu diwenehi perhatian nalika nginstal lan ngadegaken Raymond mill cilik.
Kaping pisanan, kudu ngidini teknisi profesional nginstal Raymond mill cilik sing anyar dipasang kanthi bener, mula a
Secondly, in the commissioning operation stage of the installed small Raymond mill, it should be divided into two stages: no-load operation and load operation. In the small Raymond grinding load operation test machine, the Raymond mill's grinding roller device should be fastened with the wire rope to prevent the grinding roller ring contact impact with the operation of the small Raymond mill. At the same time, it should be noted that the empty running test machine should not be less than 1 hour, and ensure that the main engine is running smoothly and orderly, so that the oil temperature in the tank is kept below 80 °C, and the temperature rise should not exceed 40°C.
Katelu, nalika operasi muatan ing mesin Raymond cilik, kudu ati-ati marang swara aneh lan getaran aneh sawise mesin wiwit mlaku kanthi normal, supaya njamin manawa ora ana kebocoran udhara ing sambungan saben pipa. Nalika mesin uji rampung, kencengake maneh saben pengikat.
Fourth, when we are debugging the operation of the small Raymond mill, we must pay attention to the air blower to start the air load, and then load it after the equipment is running normally. At the same time, observe the smoothness of its operation. Under the condition of ensuring no abnormal sound and vibration, the maximum temperature of the rolling bearing is not higher than 70 °C, and the temperature rise is not more than 35 °C.
Kempul, ing instalasi lan pangopènan wesi Raymond cilik, luwih cilik dhuwur kerja pegas tekanan, luwih kuwat kapasitas gulung saka rol ngisor saka rol penggiling, lan luwih dhuwur output alat. Mula, ing proses nggunakake wesi Raymond cilik, kita kudu ngati-ati kanggo ngontrol dhuwur kerja pegas tekanan, umumé antarane 200-210 mm.