Summary: Ing industri pembuatan pasir artifisial, crusher dampak poros vertikal, uga dikenal minangka mesin pembuat pasir, digunakake kanthi umum minangka piranti utama kanggo nggawe pasir. Ana...

Ing industri pembuatan andhas buatan, crusher impact poros vertikal, uga dikenal minangka mesin pembuat andhas, digunakake kanthi akeh minangka piranti utama kanggo nggawe andhas. Ana loro jinis cara penghancuran mesin pembuat andhas: "batu marang batu" lan "batu marang waja". Nanging akeh wong ora ngerti bedane antarane loro cara penghancuran iki kanthi cetha. Ing artikel iki, kita utamane ngenalake loro cara penghancuran mesin pembuat andhas lan perbandhingane.

Perbandingan Situasi Sing Cocok

Generally, “rock on rock” crushing method is used for shaping and “rock on iron” crushing method is used for sand making.

The “rock on rock” crushing method is suitable for crushing abrasive materials with medium hardness and above, such as basalt, etc. During the crushing process, materials injected from the impeller impacts the material liner and do not directly contact the metal components of sand making machine, reducing iron consumption and thus reducing maintenance time. The shape of the finished products is good under the crushing method of "rock on rock".

The “rock on iron” crushing method is suitable for crushing abrasive materials with medium hardness and below, such as limestone, etc. Under the “rock on iron” crushing method, sand making machine has high efficiency.

Perbandingan Prinsip Kerja dheweke

2 crushing methods of sand making machine

Mesin Pembuat Pasir (also known as "Sand Maker") have two feed modes – "feed at center" and "feed at center & sides". Generally, “feed at center” feed mode is used in “rock on iron” crushing method. In this condition, the vertical shaft impact crusher is used for sand making and has low production capacity. “Feed at center & sides" is used in “rock on rock” crushing method. In this condition, the vertical shaft impact crusher is used for shaping and has high production capacity.

Perbandingan Bagian Utama Tahan Aus

Sand making machine with “rock on rock” crushing method and sand making machine with “rock on iron” crushing method has different main wear-resistant parts.

Under the crushing method of “rock on rock”, materials form a material layer around the impact block and the materials impact on the material layer and are crushed. So, the main wear-resistant part of sand making machine with “rock on rock” crushing method is impact block.

Ing ngisor cara penghancuran "batu ing wesi", blok bentur diganti kanthi pelat pelindung pinggir, lan bahan langsung bentur menyang pelat pelindung pinggir lan dihancurkan. Mula saka kuwi, bagian sing utama tahan abang saka mesin pencetak pasir sing nggunakake cara penghancuran "batu ing wesi" yaiku pelat pelindung pinggir.