Summary: A cikin masana'antar dama, yadda ƙwarewar mashedin Raymond ta fi yawa, haka ƙara yawan fitarwa ke kasancewa, kuma hakan na ƙara ribar tattalin arziki ga kamfanin. Zai iya ...

A samar da kayan da aka narkar, ƙarfin aikin mai narkarwa na Malam Raymond, yafi yawa fitarwa, kuma yafi girma amfanin tattalin arziki ga kamfani. Za a iya cewa, ingancin niƙa na injin Raymond yana da alaka kai tsaye da ribar mai amfani. Saboda haka, inganta ƙwarewar niƙa na injin Raymond na daga cikin damuwar kowanne mai amfani. Shin akwai wata hanya don inganta ƙwarewar injin Raymond? A gaskiya, kula da waɗannan mahimman abubuwa yayin aiki, zai iya inganta ƙwarewar aiki na kayan aiki yadda ya kamata.

1. Ka guji yawa kayan aiki. A cikin aikin narke, idan adadin kayan aikin nakasa ya yi girma sosai, zai ƙara wahalar aiwatar da kayan aikin, har ma ya rage ingancin narke. Hakanan, zai yiwuwa kayan ba zai yi narke sosai ba kuma ya shafa ingancin narke. Don haka, ga kayan da ke da adadin manyan sinadarai sosai, za mu iya gudanar da maganin yanyanka kafin yin aiki, wanda zai iya inganta ingancin narke sosai.

 2. Maintain a uniform feed. When feeding, if the feed is too fast or the feed amount is too large, the material will accumulate in the grinding chamber, and the grinding speed will be too slow, which will affect the milling efficiency. If the feed is too slow and the feed amount is too small, the material will be cut off, which directly affects the production efficiency and output of the mill. Therefore, when feeding, it is an important condition to improve the efficiency of the Raymond grinding.

 3. In the grinding production, the grinding roller grinding ring is the accessory that directly contacts the material. With the operation of the Malam Raymond, the wear is gradually increased. Once the wear is serious, the material grinding is insufficient and the material is prolonged. Wear time. Therefore, the wear of the wearing parts is often checked, and the parts with severe wear should be replaced in time, so that the production efficiency of the grinding machine can be effectively improved.