Summary: 製品の細かさの変化に応じて、小径・小テーパーの多筒結合サイクロン集塵機を使用し、大径のものを置き換えます。

製品の粒度の変更に応じて、大径・大テーパーの単一シリンダーサイクロン集塵器を、小径・小テーパーの多シリンダー複合サイクロン集塵器に置き換えます。 レイモンドミル 粉じん捕集効率を高めるためには、サイクロンの直径を小さくする必要があるが、その処理能力も低下するため、多気筒複合サイクロン集じん機を用いて粉じん捕集能力を確保する必要がある。現在、国内のレイモンドミル生産ラインの多くは、脈動式集じん機を用いて生産効率を高めている。集じん効率を向上させ、ドラッグを低減することで圧力損失を削減する。
 
空気吸入システムについて話し合ってみましょう。良好な選別効果を得るためには、分類器自体の合理的な構造パラメータに加えて、分類器を通過する空気量と風圧に依存します。通常のレイモンドミルでは、粉体生成の指標に合わせて噴射量を調整しており、定格噴射量は大きく、風圧は小さくなります。インペラー分類器の風選別原理から、選別される粒径は空気量の平方根に比例します。小さな選別粒径を得るためには、
 
The specific measures for improving the air intake system are: the layout of the air supply duct must be short and smooth, avoid sharp bends, and absolutely avoid horizontal pipeline arrangement. Sharp bends will increase air duct resistance, and sharp bends together with horizontal pipelines are prone to dust deposition, which will cause finished product pollution. The air blower with high wind pressure and small air volume is nearly half of the air volume of the ordinary レイモンドミル, and the wind pressure is more than twice as high. The selection of such parameters not only facilitates the transportation and grading of high-mesh ultrafine powder, but in the case where the air volume is reduced by half, the yield is not reduced, but is increased, and the large particles in the powder are significantly reduced.