Summary: 광산 개발에서 레이맨 밀은 매우 중요한 석재 가공 장비입니다. 생산 규모에 따라 사용에 차이가 있습니다...

광산 개발에서, 레이몬드 밀 은 매우 중요한 석재 가공 장비입니다. 생산량에 따라 대형 생산 라인과 소형 레이먼드 밀 장비의 사용에 차이가 있습니다. 광물 원료를 가공하는 과정에서 레이먼드 밀 장비의 설치 및 디버깅은 매우 중요합니다. 여기서, 작은 레이먼드 밀 설치 및 디버깅 시 유의해야 할 사항들을 간략히 요약합니다.
우선, 전문 기술자가 새로 설치된 소형 레이먼드 밀을 정확하게 설치하도록 해야 합니다.
Secondly, in the commissioning operation stage of the installed small Raymond mill, it should be divided into two stages: no-load operation and load operation. In the small Raymond grinding load operation test machine, the Raymond mill's grinding roller device should be fastened with the wire rope to prevent the grinding roller ring contact impact with the operation of the small Raymond mill. At the same time, it should be noted that the empty running test machine should not be less than 1 hour, and ensure that the main engine is running smoothly and orderly, so that the oil temperature in the tank is kept below 80 °C, and the temperature rise should not exceed 40°C.
셋째, 소형 레이먼드 밀의 작업 중에는 정상적으로 작동한 후 이상한 소음과 진동이 발생하는지 주의해야 하며, 각 배관의 이음새에 누출이 없는지 확인해야 합니다. 시험이 끝난 후에는 각 체결부를 다시 조여야 합니다.
Fourth, when we are debugging the operation of the small Raymond mill, we must pay attention to the air blower to start the air load, and then load it after the equipment is running normally. At the same time, observe the smoothness of its operation. Under the condition of ensuring no abnormal sound and vibration, the maximum temperature of the rolling bearing is not higher than 70 °C, and the temperature rise is not more than 35 °C.
다섯째, 작은 레이먼드 밀의 설치 및 시운전 시, 압력 스프링의 작동 높이가 낮을수록 가공 롤러의 압축 능력이 강화되고, 장비의 출력이 높아집니다. 따라서 작은 레이먼드 밀을 사용할 때에는 압력 스프링의 작동 높이를 적절히 조절하는 것이 중요하며, 일반적으로 200~210mm 사이로 유지해야 합니다.