The development of construction crusher in Colombia

Speaking of Colombia, it may occur to us that the oil pipeline bombing happened recently. At present, it is the subsequent damages phase. Here, we are talking about the development about Colombia crusher instead of the oil pipeline bombing. How these two irrelevant event linked together? Because of the bombing, so many infrastructure are severely damaged which requires a lot of reconstruction projects. Crushing equipment are necessary in the procedure. Some manufacture aimed at this opportunity, starting to become active in the Colombia crusher market.

According to the size of the raw material, crushing equipment can be divided into primary crusher, secondary crusher and ultrafine mill. Crusher is used for crushing big size solid material into required size. Crusher is composed of primary crushing, secondary crushing and wind-force transportation and so on, with high-speed impact to the raw material. Using the wind to collect the powder instead of the traditional screening process. It is mainly used in mining, construction, chemical and other industries. In the construction of infrastructure in the bombing region, we need to use the Colombia construction crusher to produce dry powder material.

In the crushing process, there are four kinds of external force applied to the raw material which are cutting, crushing, impacting and grinding. Cutting is mainly used for cutting materials with big size and with fiber. Crushing is used in fine crushing, suitable for most raw materials. Impacting is used for crushing brittle material. Grinding is used for ultrafine grinding or large crushing equipment, suitable for the final crushing. But in the actual crushing process, these four forces are often applied simultaneously. The high-end crushers are all made according to the crushing circumstance such as the raw material and the capacity etc. So the customer can quote to Colombia crusher manufacture according to their own needs.

During the production process, the customer should send specialized staff to check the temperature of the bearing regularly. When the temperature exceeds 50 ℃, we should stop the machine, identify the reasons and shoot the trouble. For a newly operating machine, we should pay attention to the components to ensure the life of the machine. To ensure the quality and capacity, we need to check the wearing parts regularly and change the broken ones promptly. Generally, the life of bearings is 2000 hours, inside which the filling amount of grease should be 1/2(above) or 3/4(below). Too much grease will cause overheated of the bearings.

PRE: Three knows and four Cans when purchasing concrete crushers

NEXT: Peru Crushers Help World Mining Crushing Industry Move Forward