On-site Photo

 

Design Scheme

Daily operation: 12h
Material: Tailing
Finished Product: High-quality machine-made sand (0-5mm)

Project Profile

The project was invested to produce machine-made sand by crushing the tailing of cement mine. Previously, the stone scrap (0-15mm) was used as the waste. After purchasing a set of VU-120 Aggregate Optimization System from our company, the waste (stone scrap) was processed to be high-quality machine-made sand with fineness modulus within 2.1-3.2. The waste was turned into treasure and by processing it the customer can get tens of millions of yuan every year.

Introduction of Core Machines

PE750*1060 Jaw Crusher

The advanced manufacturing technology is taken. Meanwhile, by using digital processing equipment, the precision of each part of machine is kept. High-end materials strengthen resistance to pressure and abrasion to a large extent and extend the life expectancy of machines. The senior crushing principle helps increase proportion of cubic material and decrease needle-like material so the granularity is more stable and the quality of finished product is better.

CS160B Cone Crusher

On the basis of importing and absorbing the foreign technologies, SBM developed this high-performance cone crusher which integrates high swing frequency, optimized cavity and appropriate length of stroke. The working principle of lamination crushing is helpful for the emergence of material layers which function as the protection layers to reduce abrasion, extend life expectancy of quick-wear parts and increase the proportion of cubic material.

VSI1140 Impact Crusher

This impact crusher, also known as sand making machine, was developed by connecting the latest research of German experts to Chinese specific conditions of mines. It is the domestic fourth generation of advanced sand-making machine. The maximized capacity can reach 520TPH. Under the premise of using same power, this impact crusher can increase output by 30% compared to the traditional equipment. The finished product is always characterized by good shape, reasonable granularity and adjustable fineness. It's strongly recommended for machine-made sand production and dressing of material.

Customer Feedback

Previously, the stone scrap (0-15mm) was discarded as waste. The disposal of waste gave rise to considerable expenditures. Now, we process the scrap into the machine-made sand. Not only does the waste get disposal, but also we make profits. Just as an old saying puts, “killing two birds with one stone”

----Manager Mr. Liu

Back
Top
Close