Summary：First of all, we should pay attention to the working state of the lubricating points of the Raymond Mill, such as bearing, grinding roll and other parts...
First of all, we should pay attention to the working state of the lubricating points of the Raymond Mill, such as bearing, grinding roll and other parts, which should be fixed to the lubricating part regularly, and check the number and viscosity of the oil in accordance with the requirements. Ensure the good working environment of all parts of the equipment, increase the flexibility of the operation of each component, reduce the friction between the contact surfaces, prolong the service life of the equipment, and avoid the problem of the high temperature in the grinding room.
Secondly, according to the work condition, the ventilation of the grinding chamber can be adjusted properly, that is to open the ventilation pipe, make the external air flow with the air flow in the grinding room, reduce the temperature of the grinding room and avoid the high temperature of the mill room.
The overheating of the mill room of Raymond mill is mainly because after the equipment is used for a long time, the sealing condition of the equipment will continue to decline and cause the leakage of lubricating oil. It not only makes the temperature of the bearing rise, the flexibility of the operation falls, but also pollutes the material, so it is effective to prevent the high temperature of the mill room of the Raymond Mill. Necessary.