When the impact crusher machine ordered and used in the actual production line, it will have some issues in the later application. Before you buy the machine, you need to have a good understanding of after-sales issue problems solutions.
1. Hot Condition of Bearing
When the bearing is short of oil, the bearing will be hot and it needs to add the oil in time. On the contrary, if you add more oil, it will make the bearing hot. When you add oil to the bear, you need to check the oil level position. When the bearing is broken, you need to in time change the new bears.
2. Abnormal Vibration of Impact Crusher
When the machine has abnormal vibration, it may be the materials are too large and you can check the feeding material size. The plate hammer has uneven wear and it needs to change it. Or it is for the unbalance rotor and it needs to adjust. The unsuitable process of base, and it needs to check the foundation bolts and tighten them.
3. Belt To Flip
It may be for the belt is worn and it needs to change the new triangle belt.
4. Large Size of Discharge Materials
The impact hammer is worn and it needs to change the impact hammer side or change a new one. When the space between the impact hammer and impact plate is larger, it needs to adjust.
5. Knocking Inside the Machine
The materials cannot be broken enter into the machine inside part and it needs to stop it as soon as possible to clean the crushing cavity. The fasteners loose on the board and the impact hammer impacts on the board. It needs to check the board tighten situation and the space between the impact hammer and impact plate. The hammer or other parts are broken, and it needs to change the broken parts.