As important equipment for sand processing in manufactured sand production, the sand production efficiency is closely related to the overall benefit of operation. So, what method can effectively improve the sand production efficiency of sand making machine when crushing river pebble? Let's see it!
1. What factors will affect the efficiency of the river pebble sand making machine?
Although the operation of sand making machine in handling pebble is relatively simple, the output of the sand making equipment may be lower if user doesn’t follow the instructions for reasonable and standardized operation, or if the installation operation is not conducted under the guidance of the manufacturer.
Feeding too much or too little material will affect the normal operation when handling river pebble. For example, when the feed exceeds the handling capacity, it may will cause congestion, increase the load of the main engine or increase the stress of the bearing, and easy to lead to overload.
Don't do maintenance properly
Proper maintenance can prolong the service life of the equipment, meanwhile, and the service life of the sand making machine will also affect its production output and sand production efficiency.
Wrong sand making production solution
Dry production process should be used for river pebbles with high water content; otherwise the materials will stick together and affect the production efficiency of the equipment. Therefore, a reasonable sand making scheme is also one of the main factors affecting the efficiency of sand making.
Properties of raw materials
Raw materials for sand making is also a major factor that affect the efficiency of sand making machine, if the raw material contains a large number of fine powder(the fine powder is easy to adhere to the equipment), thus affecting the sand production efficiency of the river pebble sand machine.
2. How to improve the efficiency of sand making machine when crushing pebble?
1. First of all, replace the shaft in time
Shaft is a very key point for the normal operation of the sand making machine, but it’s prone to wear out, so it’s necessary to replace the shaft every once in a while. It is cleaned during the replacement process and then lubricants should be added to make the shaft better serve the sand making machine.
2. Check the condition of the parts inside the machine regularly
If the vulnerable parts are not replaced in time, it will not only delay the production and affect the efficiency of sand making equipment, but also cause great damage to the equipment itself in serious cases. Therefore, users should develop the habit of checking the equipment regularly and replacing the worn parts in time.
3. Notice the tightness of the transmission belt
Excessive tightness will affect the power transfer of motor to the sand making machine, thus affecting the sand production efficiency. So it is necessary for users to pay attention to the tightness of the power transmission belt.
The five factors affecting the efficiency of sand making machine and the three tips to improve the sand production efficiency are listed above. These points should be paid attention to the production process of the sand making machine, avoiding the equipment failure.