Nowadays, many large-scale manufacturers pay more attention to environmental protection in the production process, and the production mode of environmental protection and energy saving is more and more popularized. Especially in the high-pressure Raymond mill industry, Because the objects of processing are usually non-metallic ore materials, dust pollution is unavoidable in the process of processing, which requires users to equip a dust removal device to reduce pollution when choosing a Raymond mill equipment.
Dust collector is an important dust removal device in the production process of high-pressure Raymond mill. Dust collector itself should also do a good job of dust removal and maintenance, so that the dust removal effect will be better. So how to do a good job of dust removal and maintenance of the dust collector?
First of all, it is necessary to check the opening and closing of the internal air circuit of the dust collector and control the cleaning air. Check the blockage degree of filter bags and find mild blockage. Pull out dryness in time, pat and clear the blockage, ensure normal ventilation capacity, and avoid adverse consequences caused by blockage. In addition, it can be equipped with Raymond mill which sprays water inside the mill to ensure good atomization, but it can stop water ten minutes before the mill stops, so as to avoid the bad influence of water evaporation lag on the filter bag.
In addition, it is necessary to check the air leakage of the waste gas treatment system regularly, implement comprehensive leak plugging, and carry out necessary external insulation for the grinding waste gas system.When the dust collector is opened in the low temperature season, it is necessary to avoid excessive water entering the material during the temperature rise period, and pay attention to controlling the feeding speed.
The working state of the dust collector directly affects the environmental protection of the whole grinding process, so in order to reduce pollution, the dust collector must always keep in a good working state, so the majority of users should always do a good job of dust removal and maintenance of the dust collector of high-pressure Raymond grinding equipment.