Summary: Jaw crusher is one of the most familiar crusher equipment. It is often used to crush stone. The feeding link is the first step in the operation of the jaw crusher... ...

Jaw crusher is one of the most familiar crusher equipment. It is often used to crush stone. The feeding link is the first step in the operation of the jaw crusher. The effect of this step has a direct impact on the operation of the follow-up production. If the feeding method and timing are improper, it may cause damage to the components. The damaged parts, causing the occurrence of the failure, thus affecting the normal production work, the following for you to explain the jaw crusher feeding link should pay attention to what?

1. Check the operation of the jaw crusher to see if the operation is good, whether there is noise, if the operation is normal, then feed operation. For the first time, we should follow the principle of small size material priority and gradually add.

内容页.jpg

2. During the feeding process, the operator should prevent materials or iron impurities that do not meet the technical parameters from entering the jaw crusher, so as to avoid damage or even fracture of the jaw plate caused by overload operation.

3. After the jaw crusher stops working, it is necessary to pay attention to cleaning up the impurities in the feeding area, so as to avoid blocking phenomenon in the next operation.

Doing a good job in the feeding link is the basis for guaranteeing the normal operation of the jaw crusher. It needs the attention of the feeding operator and the person in charge. Good cooperation is the key to improve the production efficiency.