If you want to improve the output and quality of Raymond mill, you need to control and set up the operation of each part. A good plan can directly increase the output of Raymond mill. Here's how to better control Raymond mill.
- 1. Particle size control of grinding materials
If the ore in the feed contains a certain amount of large slab aggregate and debris, a 40 mm grille is specially set at the feed port, and a vibrating screen is set to screen out the debris, so as to prevent the massive material from entering the mill, resulting in the instability of the abrasive layer vibration jump and stop.
- 2. Setting of Raymond mill inlet and outlet
The grinding system of Raymond grinder is the core of the whole production line. The upper side inlet of ordinary Raymond grinder is prone to blockage due to the excessive moisture content of raw materials. The feed inlet can be changed to the feed of the central screw conveyor to ensure the smooth feeding of clinker.
- 3. Design of Hot Air System
In order to ensure stable heating, effective regulation and cost reduction of fluidized bed furnace, circulating air system can be set up, and electric high temperature regulating valve and cold air valve can be installed on the outlet pipe of hot blast furnace. In order to effectively mix hot air with circulating air and cold air in fluidized bed furnace.
- 4. Production Process Control
DCS control system is used to centralize and monitor the whole process of grinding system, product conveying storage and fluidized bed furnace combustion system. The system adopts modular structure, easy operation and modification of program, fast transmission speed, simple and intuitive interface display, reliable operation and improved productivity.