Summary:The flywheel is a very prominent big guy in the jaw crusher. Many people wonder what the flywheel is doing. There are two flywheels on the jaw crusher. One of t
The flywheel is a very prominent big guy in the jaw crusher. Many people wonder what the flywheel is doing. There are two flywheels on the jaw crusher. One of the flywheels is used to connect the V-belt and the eccentric shaft. The other one seems to have no effect on the shape. It increases the weight of the equipment in vain. Can't it be removed? The following will be announced for everyone.
In fact, the flywheel is a component that is inseparable from all mining equipment. It is also a key component. In various crusher equipment, the flywheel plays an irreplaceable role. Therefore, the flywheel cannot be removed. The flywheel also plays a very important role in the operation of the equipment.
From the appearance of the jaw crusher equipment, it is not difficult to see that there are two large iron wheels on both sides of the jaw crusher equipment. These two wheels are what we call the flywheel.
The two flywheels are respectively at the two ends of the eccentric shaft. One of the flywheels is used to connect the V-belts and the eccentric shaft to transmit the kinetic energy. The other is the flywheel that is useless in many people's eyes. In fact, this flywheel plays in the operation of the jaw crusher. Crucial role. The main reason is also from the working principle of the jaw crusher. The jaw crusher is an indirect working device, which causes the resistance on the eccentric shaft to change, the motor load is uneven, and the mechanical rate fluctuates. This flywheel is installed to evenly load the motor, reduce the rated power of the motor, and reduce mechanical rate fluctuations.
The flywheel stores the energy of the jaw crusher during the empty stroke and releases it when the material is squeezed. That is, when the movable raft leaves the fixed raft, the flywheel accumulates energy, and when it is closed, the flywheel transfers the accumulated energy for the material of the crusher. This makes the load of the motor tend to be uniform, thereby reducing the rated power of the motor. Thanks to the flywheel, the energy consumption of the jaw crusher is even.
Not all smashing machines are only one flywheel connecting the V-belt, and there are also two flywheels connected to the V-belt jaw crusher, such as a large motor with two motors. The crusher treats both flywheels as a pulley-connected V-belt. This simplifies the structure of the device and makes the best use of it.