In the working process of Raymond mill, through introducing the principle of material comminution, it can be found that the machine mainly finishes the process of material comminution by the joint action of shovel and grinding roller and grinding ring. In this process, these important parts will also appear wear and tear, so in order to reduce wear and tear for production. We need to carry out a reasonable adjustment and maintenance, here is mainly to introduce the adjustment of grinding rolls.
The adjustment of grinding roll is correct or not affects the efficiency of Raymond mill work. To complete the adjustment process correctly, we need to know how to adjust and when to adjust it. We will introduce the adjustment and maintenance process of this part in detail from these aspects.
For the adjustment of the grinding roller in Raymond mill, mainly for the adjustment of the distance between the two grinding rolls, the adjustment must be in accordance with the technical requirements, and flexible adjustment of the distance between any two mill rolls, so as to ensure a certain uniformity, at the same time in the adjustment, attention should be paid to the convenience of operation, so as to In addition, when adjusting the grinding roll, it is necessary to keep the distance between the grinding rolls within a certain range, and the safety of the equipment. In the process of Raymond mill operation, when the two grinding rolls are brought into the harder object, it is necessary to ensure that the distance between the two grinding rolls can be relaxed automatically to make it safe and smooth. In another case, when the incoming material stops or emergencies occur, the two grinding rollers can be separated quickly, so as to avoid the tooth grinding damage caused by air grinding.
In addition, when we use Raymond mill, we should not only pay attention to the adjustment of the roller, but also pay attention to the maintenance of this part in the work, only to carry out good maintenance, in order to reduce production failures, so that it can better serve the production process of materials.