Summary: First, the fineness of the finished powder is relatively uniform, and the screening rate is as high as 99%, which is difficult for other grinding equipment....

First, the fineness of the finished powder is relatively uniform, and the screening rate is as high as 99%, which is difficult for other grinding equipment.
 
Second, the important components are made of high-quality steel, wear-resistant parts are made of high-performance wear-resistant materials, the machine has high wear resistance and reliable operation.
 
Third, with centralized control of the electrical system, the grinding workshop can basically achieve unmanned operation, and maintenance is also simple and easy.
 
Fourth, its shape belongs to the three-dimensional structure, the area occupied by the land is relatively small, and the complete set is strong, from the fast material to the finished powder independently into a production system.
 
Fifth, the transmission device adopts a closed gear box and pulley, which has stable transmission and reliable operation.
 
Maintenance and maintenance of raymond mill in use:
 
1. In order to enable the normal use and production of the mill, the users usually need to develop a series of systems, such as "safe operation system for equipment maintenance", and at the same time prepare the necessary maintenance tools as well as grease and corresponding accessories.
 
2. After using for a period of time, it is necessary to overhaul the equipment, and at the same time, repair and replace the wearing parts such as the grinding roller and the blade. The grinding roller device should be carefully checked for connecting bolts and nuts before and after use to see if there is any looseness and whether grease has been added.
 
3. Regarding the grinding roller device, after 500 hours of operation, it is necessary to replace the grinding roller, and the rolling bearing in the double roller sleeve must be cleaned, with damaged components replaced in a timely manner. The fueling tool can be manually added. Oil pump and grease gun.
 
4. There is also something users need to pay attention to: the Raymond mill should have a fixed person in charge during use, and the operator must have a certain level of technical knowledge. The Raymond mill must perform the necessary technical training before the installation to understand the principle performance of the mill and familiar with the operating procedures.