Summary：As long as it is a mechanical device, in daily production, there will be large and small faults. Broken stone equipment is currently the most commonly used crus

As long as it is a mechanical device, in daily production, there will be large and small faults. Broken stone equipment is currently the most commonly used crushing equipment. When the equipment is working, it will also be faulty for some reasons. Don't underestimate these faults, it will be "fatal" if you don't pay attention. In order to help everyone better production, here are some of the deadly factors in the operation of the broken stone machine.

Each mechanical device has its own requirements and scope of work. If it exceeds the working range of the equipment or does not follow the instructions, it can only speed up the damage of the equipment. When the crushing stone machine is used for crushing operation, the operator must ensure the speed of the blanking, to be uniform, to ensure the uniformity of the material size, and the hardness and water content of the crushed material are all within the requirements of the broken stone equipment. If the material is too strong and too large, you should add a process in front.

Under normal circumstances, the angle of the broken stone equipment is about 18-20 degrees. If the angle is too large, it will cause the ore to be squeezed upwards, which will not only damage the operator but also damage other equipment. The larger the angle, the lower the productivity of the equipment. To change the size of the corner, it is necessary to adjust the size of the discharge port. Therefore, under the premise of ensuring the quality of the finished stone machine, it is very reasonable to enlarge the discharge port as much as possible.

In the appropriate range, increasing the number of revolutions of the eccentric shaft can increase the production capacity of the crushing stone machine, but it also increases the energy consumption, which is not worth the loss. If the rotation speed is too large, the ore that has been broken cannot be discharged into the crushing chamber in time, resulting in blockage, reducing the production capacity of the crushed stone equipment, increasing the power consumption, and having a certain impact on the production. Therefore, the crushing equipment should choose the appropriate number of revolutions.

Only by grasping the deadly factors of the broken stone machine can we avoid these factors, reduce the damage to the equipment and improve the production efficiency of the equipment. For users who want to buy new crushing equipment, they should choose a regular manufacturer, and carefully look at the picture of the broken stone machine provided by the manufacturer, and make a preliminary understanding of the equipment through pictures.